The methods of using the wellhead device mainly include the following steps:
Preparation: First, make sure that the wellhead device used is complete and intact, check its integrity, the fastening of each component, and the sealing performance. If there is a problem, it should be repaired or replaced in time. At the same time, the oil wellhead device manufacturer checks the environment and safety measures around the wellhead device to ensure the safety of operation.
Install the wellhead device: According to the requirements in the operation manual, correctly configure and install the wellhead device. During the installation process, ensure that the working area around the wellhead is clean and tidy, and take necessary safety protection measures.
Operate the wellhead device: The operator needs to concentrate throughout the process, and it is strictly forbidden to be distracted by other things during operation. According to the operating steps in the operation manual, step by step open, adjust and close the wellhead device. During the operation, pay attention to observe the operation of the device, and promptly discover and deal with abnormal conditions. It is strictly forbidden to modify or adjust the parameters and settings of the equipment at will during operation.
Inspection and testing: After the installation is completed, the wellhead device needs to be inspected to ensure that its installation meets the relevant standards and requirements, such as neat, stable, and firm. At the same time, check the operating status of the wellhead device and observe whether there are abnormal vibrations, noise or abnormal temperatures. In addition, it is necessary to perform plugging operations, install pluggers and perform plugging tests to ensure that they can effectively plug the wellhead and avoid oil and water leakage.
Cleaning and tidying up: After the operation, the oil wellhead device manufacturer should promptly clean and tidy up the wellhead device and the surrounding work area to ensure the cleanliness of the equipment and environment.
Please note that safety is always the primary consideration. Operators should have the qualifications and skills for relevant positions and receive relevant training to ensure that they are familiar with the operation, maintenance and safety procedures of the equipment. During the operation, necessary safety protection measures should be taken, such as wearing safety helmets, gloves, protective glasses, etc.
The above are the basic methods for using wellhead devices. The specific operations may vary depending on factors such as equipment model and production environment. Therefore, in actual operation, it is recommended to strictly follow the equipment operation manual and the guidelines provided by the manufacturer.